DEUTSCH Connector Extraction Tool / DT-RT1

The removal tool is designed to be used to remove individual DEUTSCH size 16 solid and stamped and formed (S&F) pin and socket contacts from front-release connectors (such as DT, DTM, DTP, DTV, DRB, DRCP, and STRIKE* connectors).

How to Remove Socket Contacts in DEUTSCH Connectors

1. Slide the screwdriver tip of the removal tool under the secondary wedge lock, and by evenly lifting it, remove it from the connector. CAUTION Be careful not to damage the outer perimeter seal of the connector.

2. Insert the screwdriver tip of the removal tool into the contact cavity of the contact to be removed to release the locking finger.

3. Holding the rear seal of the connector in place, pull the wire until the contact is removed.

Removing DEUTSCH Connector Pin Contacts

1. Using the hook tip of the removal tool, grasp the secondary wedge lock, then pull it straight out of the connector.

2. Insert the screwdriver tip of the removal tool into the contact cavity of the contact to be removed to release the locking finger.

3. Holding the rear seal of the connector in place, pull the wire until the contact is removed.